How to change the rear tire of an e200 electric scooter?

Any vidoes?How to change the rear tire of an e200 electric scooter?e200 razors have a few different models, and some are belt driven, some are chain driven. Also some have 2 piece split rims, and some have 1 piece rims. After removing the wheel, on the 2 piece rims, remove the sprocket bolts, and loosen the inner rim bolts to separate the rim. Replace the tube and tire, and reassemble in the reverse order. Be careful re-inflating using high pressure air sources. On the solid one piece rims, remove the sprocket, and change it in the same manner as you would a bike tire (using tire spoons and a little finesse). If you have to do it this way, using soapy water on the bead of the tire will let you move the spoons more freely. Putting the new tire on is kinda tough at first, and may take some muscle, but can be done with a little patience. Once the first bead is on, slip the tube inside, and run the valve stem out, being sure not to pinch it, then finish putting the other bead over the rim. Inflate to proper PSI, and put your sprocket back on, and reinstall on the scooter.