Friday, September 23, 2011

How do you change a flat tire?

I am sitting on the side of the freeway with a flat, I am wondering if anyone knows how to change it or a website that can give me the info for Free. I dont want to go to a shop and get ripped off.How do you change a flat tire?1. Put car in park. Make sure you have the hazards on. Turn engine off.



2. Place a wheel chock or large rock behind (if facing up hill), or in front (if facing downhill) the diagonally opposing wheel to prevent the car from rolling. Do this even if you're on a slight incline. Get out the spare, a lug nut wrench (tire iron) and the car jack.



3. Remove hubcap, if necessary. Obviously if you have rims only you don't need to do this.



4. Loosen the lug nuts, which hold the wheel in place, before jacking up the car: Place one end of the lug nut wrench over a lug nut. Use a hollow pipe (about 2 feet in length) for leverage by slipping it over the end of the lug nut wrench. Turn the wrench counterclockwise to loosen the lug nut. Loosen the lug nuts in a star pattern, first loosen one a few turns, then loosen the one opposite. Work across the tire until all the lug nuts are loose and unscrewed slightly.



5. Carefully jack up the car. Check your owner's manual for the correct and safe place to put the jack. Jack the car up a little higher than is necessary to remove the old tire so there is room to put the new, full tire on.



6. Remove the lug nuts all the way and set them aside in a place where you won't lose them and they won't roll away. The flat tire should be hanging from the threaded studs now.



7. Remove the flat tire and set it aside.



8. Lift the new tire onto the wheel studs. If you're confused about which is the right way to put the new tire on, check for the valve where you add air, it always faces out.



9. Replace the lug nuts. Tighten them the same way you loosened them: Give each nut a few turns, first one, then the one opposite, working around the wheel in a star pattern. Try not to tighten adjacent nuts consecutively.



10. Slowly lower the jack and remove it.



11. Tighten the lug nuts again as much as you can.



12. Put the hubcap back on.How do you change a flat tire?look in the trunk there should be a tire a jack and a lug wrench in there if you drive a sedan if a truck it could be under the bed.



1. put the car in park and emergency break on

2.loosen the lug nuts (bolts on the tire)

3.jack the car up

4.remove the flat

5.put the spare on and put the bolts back on do not tighten the bolts all the way just snug

6. drop the car and tighten the bolts in a star pattern starting with the top bolt then move to the bottom then side to side.



How do you change a flat tire?If indeed you are sitting on the side of the freeway, check your registration and/or safety inspection stickers and there might be an %26quot;800%26quot; to call and the state will send free help. They will change the tire, hope your spare is ok. BTW if you are out of gas they will even bring to you and give you a gallon, for free.How do you change a flat tire?Frost got it right. Do you have internet access at the side of a

freeway. I want that in my car. How do you change a flat tire?Any one who doesn't know how to change a tire is on the left side of the bell curve, and shouldn't own a car or a computer. Put a for sale sign on it and take a cab home. How do you change a flat tire?I'd wonder why you are leading people on? You know how.How do you change a flat tire?I know that you know your way around cars .... why ask this question????